Manufacturer: Cool Components
This is to add the Exhaust Blowers to the 2FN & 4FN Component Units. This is the same assembly found on Fully Loaded unit.
This kit includes a 4 fan assembly and necessary mounting hardware. Assembly is extremely easy as the fans snap into place with the specialty rubber mounts and then simply plug the power wire into an existing plug. Installation takes only a few minutes.
Ensure to Follow Proper Polarity when Connecting Power Wires
On the ends of the connectors - Tip must align with +
60mm Blower Fan Specifications
Fan Type: 60mm Brushless Magnetic Levitation Blower Fan (Est. 50,000hr)
Air Flow: 4 CFM per fan (Max)
Noise: Silent to ~20 dba (Max)
Connection: 2-Pin FastWire System (Ensure proper polarity - Tip to +)
Voltage: 7 to 9V DC for Normal Operation or 9-12V for More Aggressive Cooling
Current: 40 milliamps per fan at 12V DC