This product has been discontinued due to supply issues with the ducting, we will be creating a higher airflow version in the near future, if you need help with system design or need replacement parts for this, please contact us.
While the Purpose, Function, and Installation of this Product is Relatively Straightforward, Please Fully Read the Description and Supporting Documentation to Ensure that this Product is Correct for Your Application
It is also important to ensure to order all necessary parts and accessories
Manufacturer: Cool Components
This system was designed with the challenges of venting cabinetry in mind. It is ideal for fine cabinetry that you do not wish to cut holes in, built-in cabinetry with limited options for venting, or when cabinets have multiple bays and components are in the center areas. This is the first product to defy heat naturally rising as it pulls hot air into the duct and then down and out the toe kick of the cabinet.
Not only is it perfect for these applications, it is also fairly ease to install (need to have basic tools and skills) and fully configurable to work perfectly in a variety of systems and configurations. The body of the unit is made out of attractive yet durable PVC tubing and the fan units are easily cut into the body at the ideal locations for the application. This way, there is no need to worry with the placement of the components as a fan unit can be installed behind each piece of heat producing equipment. The side of the body can also be fitted with wiring clips to keep the wiring neat and organized. Additional tubing can also be added and additional fan units are available as well.
Note: In cabinet/shelf areas where there are larger heat producing components,more than one fan in that area may be required to fully vent the hot air.
As with all of our products, the fans in the Cabinet Duct System are variable speed and by adding a Temperature Controller, you can add automatic control including basic on/off as well as automated variable speed control so as the temperature rises, the fans accelerate. The system is fully compatible with all of our temperature controllers and the controllers simply plug inline between the power supplies and power jack on the system.
Engineered To Directly and Efficiently Vent Challenging Cabinetry Applications
Pulls Hot Air from Behind Components and Directs It Down and Out the Toe Kick
Fully and Easily Customized and Installed in Cabinets of All Sizes and Configurations
Specially Manufactured 50mm Levitation (Brushless & Vapo Bearings) Fans for Quiet Operation and Longer Life
Fans Mounted Using Specialty Mounting System to Absorb Fan Vibrations for Quieter Operation
Uses Variable Voltage Power Supply to Adjust Fan Speed
Compatible with Temperature Controllers (TC-BSC, TC-ALT and TC-AC)
System Comes with Tubing Assembly, Two Fan Units, and a 300mA Power Supply - Additional Tubing & Fan Units are Available
Dimensions: Tubing: 3.35 x 1.38 (8.5cm x 3.5cm), Main Section
is 3' (92cm) in Height (Extension Available]
Construction: Gray PVC
Cooling System: Includes 2 - 50mm Fan Units w/Guards Included
(Add'l Fan Units Available)
Fan Life: Estimated 60,000 Hour Service Life
Air Flow: ~4W-CFM - 10M-CFM per fan
Noise: Noise Level is Dependent on System Settings and Options
(Can be run quietly)
Power Connection: 2.1mm Coax Connector w/ 2-Pin FastWire Power System
(Ensure Proper Polarity)
Voltage: 7 to 12 VDC
Current - Amp: Each Fan Unit - 50mA
Contents & Options
System Contents (See 'Duct System Assembly' Image Above)
Tubing Assembly & Accessories
Two Fan Assemblies
Power Parts - Power Supply, Connector, & Wiring
Options Purchased Separately (See Related Items Below)
Duct Extension Pieces (For Larger/Taller Cabinets)
Additional Fan Units (Ensure to order additional cables for additional fan units the system has a plug for one additional fan, if more than one fan is added, use a short y-cable)
Toe Kick Grills - Not included due to various options (wood/wood types/plastic/colors) and because not all applications will require a toe kick grill
Temperature Controllers (Compatible w/Basic & Advanced Controllers)
Templates (For Reference Only Due to Variations in Printing that May Occur)