The unit features three selectable modes with different on/off set points. The setpoints are at 80˚F/27°C, 90˚F/32°C, and 100˚F/38°C, and are identified by the number of beeps heard when depressing the mode button on the side of the unit. Mode 1: One Beep, Mode 2: Two Beeps, and Mode 3: Three Beeps.
Mode 1 - On at 80F and off at 77F
Mode 2 - On at 90F and off at 87F
Mode 3 - On at 100F and off at 97F
*** These are all fixed set points and progressions and cannot be changed ***
Dimensions: 3" W x 1 3/8" D x 3/4" H (76 x 35 x 19mm)
Compatibility: All Cool Components Low Voltage Products
Construction: Black ABS Plastic
Important Note: This unit should only be used with regulated power supplies. If not using a regulated power supply and using an unregulated adjustable voltage power supply such as the PS-300 or PS-500, the power supply should then possibly require a setting of 9V, although this is not optimal. The issue is that often times unregulated power supplies will supply higher voltage when not under load or under a light load. Higher voltage will not damage the unit, it simply will not perform within the specifications.
Connection: 2-Pin FastWire Power System
(Ensure proper polarity - Tip to +)
Voltage: 12V DC ***See “Important Note” above***
Current - Amp: Output rated at 2 Amps (Max)